Why does my dishwasher say LC

The LC or LE error code appears when the dishwasher’s leak sensor detects moisture or the water reflector is blocked (Waterwall models only). When this code occurs, the dishwasher will turn itself on and will not turn off. During this time, it will attempt to drain the water away.

How do you clear the LC code on a dishwasher?

Quick answer: The LC flashing on your Samsung dishwasher indicates that the leak sensor in the dishwasher detects a water leak or moisture. To clear the error code LC, simply remove power to the dishwasher for 15 minutes. This should reset the dishwasher and clear the error code.

What does LC mean on washing machine?

If the control lock has been activated, the control will not function. If you try to push buttons, you may see the code “LoC” or “LC” (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.

How do I fix the LC code on my Samsung dishwasher?

When the LC code is flashing on your Samsung dishwasher it indicates the unit’s leak sensor is detecting moisture or a water leak. If you’d like to simply clear the code it’s as simple as unplugging the power cord to the dishwater for about 15 minutes. Doing this should clear the error and reset your dishwasher.

Why is my LG dishwasher flashing CL?

CL – Child Lock This code means that the CHILD LOCK or CONTROL LOCK feature has been activated. When activated, all buttons will not change except the washer’s door and the POWER button. To activate the child lock: Open the dishwasher door.

How do I drain my Samsung dishwasher?

Inspect the dishwasher’s drain connection at the sink. …
Check the drain hose. …
Run water in the sink that the dishwasher is connected to. …
Clean the drain, filter, and sump in the tub. …
Request service.

How do I find a leak in my Samsung dishwasher?

Step #1: Run a cycle to help find the source of the leak. …
Step #2: Inspect the water supply hose. …
Step #3: Inspect the drain hose as well. …
Step #4: Inspect the rubber seal. …
Step #5: Only use dishwasher detergent, not dish soap. …
Step #6: Level your dishwasher.

How do you remove the Control Lock on a Whirlpool washing machine?

Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds.

What does LC error mean?

What does lC error code mean? It indicates a malfunction of the pressure switch. The function of this element is to inform the electronics that the tank is full enough, and it is time to proceed to the next action. But in case of damage, the signal does not reach the control board or comes with distortion.

How do I fix my Whirlpool washer Loc?

If you do not see the 3-2-1 countdown and are unable to de-activate Control Lock, try pressing the POWER button first, then touch and hold 3 seconds to de-activate control lock. If this does not work, try unplugging the machine or turning off the breaker for 1 minute, then power the machine back on and try again.

Article first time published on

How do I clear the CL on my LG dishwasher?

Pressing down the wash and rinse buttons simultaneously.
Hold both for at least five seconds.
Release the buttons.

How do I turn off CL on my LG dishwasher?

The Control Lock feature helps prevent settings from being changed during a cycle. This feature locks all of the buttons on the control panel except for the Power button. Press and hold Dual Zone for 3 seconds to activate or deactivate this function.

What is LC code on Samsung dishwasher?

Leakage error The LC or LE error code appears when the dishwasher’s leak sensor detects moisture or the water reflector is blocked (Waterwall models only). When this code occurs, the dishwasher will turn itself on and will not turn off. During this time, it will attempt to drain the water away.

Why is my Samsung washing machine leaking?

Top reasons why Samsung washer is leaking include a faulty water inlet valve, a problematic drain pump, a clog in the drain filter, damaged door seal, or soap dispenser hose is blocked.

What causes dishwasher to not drain?

It is quite common for a dishwasher to not drain because either the drain hose or the air gap (if the unit has one) is clogged up. Drain hose clogs commonly occur where the hose is attached to the main household drain line, or where the hose connects with the garbage disposer.

How do you fix a dishwasher that will not drain?

Run your garbage disposal.
Clean your sink’s air gap.
Remove standing water.
Clear up detergent mishaps.
De-gunk the drain basket.
Check the drain hose for kinks.
Examine the drain hose for clogs.
Replace the drain hose.

WHAT IS A PBA on a dishwasher?

Water inlet valve, Main power board assembly (PBA).

What does LC mean on a Whirlpool washer?

If you try to push buttons, you may see the code “LoC” or “LC” (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.

How do you unlock the control lock on a Whirlpool dishwasher?

Press and hold the designated control lock button for your model for 3 seconds. The location of the control lock button may vary depending on your model. Refer to the Owner’s Manual for the control lock button location for your model. The light will turn off and the control will be unlocked.

What does LC mean on Whirlpool dryer?

If you see the “LOC”, “lc” or “LC” code on the control, the control lock has been set. Disconnect the control lock setting. If you are unsure of how to disconnect the control lock for your model, see your Owner’s Manual.

How do I force my Whirlpool washer to unlock?

Press the “Drain and Spin” button on the washer’s control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the “Drain and Spin” cycle completes, the door should unlock.

How do I reset the touchscreen on my Whirlpool washing machine?

Press PAUSE/CANCEL twice to cancel the cycle. …
Press POWER.
Select the desired wash cycle.
Select the desired Modifiers and Options.
Press START.

Why does my washer say Loc?

The letters (LOC) indicates Controls are Locked. To avoid having someone accidentally start or stop the washer, press OPTIONS and SELECT at the same time until the Control (Control Lock) indicator is lighted. the controls, press OPTIONS and SELECT at the same time until the Control (Control Lock) indicator goes off.

How dO I turn off child lock?

To turn off the child lock, simply turn the key in the other direction. Your vehicle may have electric, remote child-proof locks. If so, you can lock rear doors and windows at the press of a button inside the car. There should be a small symbol of a window with an X in it as well as a small child symbol.