Can a toilet be moved easily

Moving a toilet is not so much about moving the actual fixture—in fact, installing a toilet is a simple job that takes less than an hour—as it is about moving the drainage and the water supply plumbing to the new location. Once all of the plumbing is in place, installing the toilet is a relatively easy task.

Can you move a toilet anywhere?

On a serious note, it is absolutely possible to install a toilet, even a bathroom as a matter of fact, anywhere in your house. In the past, many homeowners have had the idea of their dream bathroom crushed because the location was simply too far away from the main drain.

Can a toilet waste pipe be moved?

There is usually a vertical waste water pipe under the toilet that uses gravity to move wastewater away. For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.

How do you relocate a toilet?

Make a plan. Make space for the toilet before you move it. …
Turn off the water. …
Remove remaining water. …
Disconnect the supply line from the toilet. …
Remove the bolts. …
Remove and move the tank. …
Remove and move the toilet bowl. …
Clean and plug the drain hole.

Is it expensive to relocate a toilet?

The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move. Connecting the toilet to the existing sewer line can be a bit tricky for your plumber.

How hard is it to move plumbing in a bathroom?

Relocating plumbing can be a time consuming and hard work. That’s why you should only do it if you have prepared beforehand and if you have confidence in the professionals you chose to do the job. But take comfort in the fact that once it’s done, you won’t have to think about it for a long time.

Is it possible to move a toilet in a bathroom?

Moving a toilet is not a straightforward weekend DIY job, but it is very doable when you involve the professionals. Once the toilet itself is removed, your plumber will have to move the drainage, as well as the water supply to accommodate the new location.

Can you move a toilet to an inside wall?

Generally, you can install a toilet on an internal wall as long as there is enough room underneath the floor to run the waste line to the mainline. … If there is enough room, the only other requirement is that you have a wall with the proper structural studs in it and cavity space for the piping.

Can you switch a toilet and shower?

The simple answer is yes, you can put a toilet where a shower was, but the move doesn’t come without its issues. This isn’t a simple DIY job. You are going to have to remove at least one wall and, hopefully, only a small portion of the floor.

How much does it cost to move a toilet waste pipe?

The national average materials cost to move a toilet drain plumbing is $164.13 per line, with a range between $153.56 to $174.69. The total price for labor and materials per line is $746.11, coming in between $670.85 to $821.36.

Article first time published on

How expensive is it to relocate a bathroom?

The national average for installing plumbing is about $13,500. This includes labor charges, materials and supplies, bathroom fixtures, and removal as well as disposal fees. If your new location is near your existing plumbing, your bathroom renovation cost will be lesser.

How far can a toilet be from the main stack?

Tie the waste line from the new toilet directly into the stack if the toilet is within six feet of the stack and the waste line is 3 inches in diameter. If the waste line is 4 inches in diameter, the toilet can be as far as 10 feet from the stack.

Why does my toilet moves side to side?

If the flange is a little higher than the surrounding flooring, the toilet becomes raised slightly in the center, allowing it to rock to either side. This problem can develop over time, such as when the wax seal becomes faulty or when a surrounding floor settles a little.

Where is toilet drain located?

The standard placement for a toilet drain in the bathroom is 12 inches from the wall behind the toilet. The 12-inch measurement runs from the wall itself to the dead center of the drain.

Can I change bathroom layout?

The good news is, in most cases, it’s perfectly possible. How easy is it to move plumbing around? It might feel daunting to those of us who aren’t plumbers, but, in most instances, it’s quite possible to move pipework and fittings around, so don’t assume the positions of your bath, toilet and basin are set in stone.

Can you put a toilet where a sink was?

You can potentially rearrange fixtures and still make use of the existing plumbing. For instance, you can have your toilet and your sink swap places. … You have cold water running to the existing toilet area, which fills the tank in the back.

How much does it cost to move a toilet Australia?

Every property in Australia is unique so the cost to move a toilet can vary from $100 to many $1,000’s depending on the property type & layout. What will vary greatly is the time, tools and materials needed to complete any type of toilet move whether that is a wooden floor board or concrete slab.

Can you build over a sewer pipe?

Building close to or over a public sewer without having obtained formal approval is illegal. It may also jeopardise the future sale of your property.

Can a toilet be installed in a corner?

Yes! Corner toilets typically come with a smaller, round bowl, and the tank and is shaped like a triangle to snugly fit into the corner of the bathroom – space that is ordinarily wasted. Besides, you won’t require a lot of plumbing systems to install a corner toilet.

What is toilet flange?

A toilet flange is typically a circular piece of material with several holes in it. Through these holes bolts are inserted which secure the flange tightly to the floor, and thus to the sewer drain pipe. … An air tight seal is formed allowing material to flow through the toilet to the sewage line without leaking.

How far should toilet be away from wall?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

Does a toilet have to be against a wall?

There is no hard-fast rule about whether a toilet should touch the wall, as it is a matter of personal preference. Some people are okay with a toilet tank’s top touching the back wall, while others desire a minimum of one inch of space between the commode and the back wall.

Can you move a waste pipe?

To prepare for moving a waste pipe to a new location, you must always start by shutting the water off to the home. You should also already have a good idea of your new layout and know where your waste pipe needs to be moved before you start the job.

Can a toilet be moved 6 inches?

Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side.

Can a bathroom be moved upstairs?

There are many benefits to moving a bathroom upstairs if you don’t already have one. One of the most common reasons and a big benefit of moving a bathroom upstairs is the space that’s freed up downstairs. It’s perfect for repurposing it into a larger living space, an office, or even a home gym.

Do you need planning permission to move a bathroom upstairs?

As with re-fitting kitchens, there’s normally no need for planning permission unless the building is listed. Building Regulations are only likely to apply where you decide to add a new bathroom, for example in a former bedroom or storage area. This may include some or all of the following: New drainage.

Does toilet need vent?

“Does a toilet need a vent?” And the answer is yes, your toilet has to have a vent. For more information on the great importance of plumbing vents, read our plumbing vent article here. And the size of this vent pipe depends on your local plumbing code.

How far can the vent pipe be from the toilet?

According to the UPC, the distance between your trap and the vent should be no more than 6 feet. In other words, for the vent to work properly, it needs to feed into the drain line within 6 feet of the trapways that connect to it.

Can toilet vent have bends?

Changes in direction of vent piping shall be made by the appropriate use of approved fittings, and no such pipe shall be strained or bent.